This is a spool holder that specifically will fit inside a RatRig V-Core 4 chamber and not interfere with the bed.
4
22
1
266
updated July 28, 2024

Description

PDF

This is a spool roller specifically designed to fit and not interfere with the print bed in a RatRig V-Core 4 enclosure while still holding a 3kg spool. This has been tested with the polymaker 3kg spools, and it fits perfectly. I would recommend pan head screws, as they are a bit lower profile.

Hardware required:

  • 4 - m3x16 (or longer) bolts
  • 4 - 608 bearings

Print tips:

  • 1 -  SpoolBase
  • 2 - SpoolFrame
  • 2 - SpoolRoller

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

This remix literally is just a cut down version of the original. The roller is 120mm wide, the sides are 5mm wide instead of 10, and the base is 135mm total width. 

License