Case for Xiaomi Redmi Note 11 Pro 5g with USB C cover

I printed this case with the camera protection separately because I didn't want to print it with a lot of support but you can choose how you want to do it.

I took a soldering iron (didn't have good glue at this moment) for assembling them (200°) and a heatgun (100 - 120°)  for folding the USB C cover.
 

I used PolyFlex TPU 95A

I Sliced it in PrusaSlicer 2.8.0 with the default 0.2 Quality profile

I modified the following settings :

- Adjusted Supports (Snug)
- Small perimeters speed set to 10mm/s
- Only one perimeter first layer