The Witch [Two Parts - Dark Series]

Something different, “The Witch” is the fourth and last part of a series with 4 filament paintings. The vibe is dark and gloomy, with not much white.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA BambuLab Basic Black
• PLA Overture Cement Gray
• PLA BambuLab Basic Blue Gray
• PLA BambuLab Basic Gray
• PLA Overture Light Gray
• PLA BambuLab Basic Jade White
   

Swap Instructions:

• Start with Black
• At layer #9 (0.8mm) swap to Cement Gray
• At layer #12 (1.04mm) swap to Blue Gray
• At layer #15 (1.28mm) swap to Gray
• At layer #20 (1.68mm) swap to Light Gray
• At layer #23 (1.92mm) swap to Jade White for the rest.