Upgrade for Sovol SV06 Plus Mean Well LRS-350-24 Power Supply (PSU) Cover

On my first version I created a remix of this model but then quickly realised after making a few iterations of it that it would actually just be better to keep it simple and more like the stock one supplied by Sovol SV06 Plus.

So I've made a totally from scratch version that should fit in nicely - everything the original already had should fit into this one - including the screws. So there are no additional parts to buy, just print and away you go!

For the upgrade you'll need:

• Mean Well LRS-350-24 Power Supply.
  • This is a 24 volt 350 watt power supply, with the same mounting holes as the SV06 Plus stock.
  • It is thinner than stock, but it is much quieter and the fan only turns on when it needs to (i.e. temperature operated).
  • I know the SV06 Plus is marketed with a 500w 24v supply, but the printer actually uses way less than that. It will never use the full 350w, it actually comes in at more like 280-300w with everything turned on. So plenty of room for other upgrades.