Anycubic Wipetower Cage
Easy "clip-on" cage with a bottom outlet for an "Anycubic Kobra 3" Wipetower.
18
171
2
820
updated
July 27, 2024
Description
PDFThe goal was, i do not have to screw or glue the pieces together or onto the printer. So i designed in a way it could easily clip onto the wipe tower. (With gentle force 😉)
For the Wipetower Cage & Cap i used following settings:
| Preset | 0.10mm 3D Photo KOBRA3 | |
| Layers and perimeters | First layer height | 0.13 |
| Fill gaps | true | |
| External perimeters first | true | |
| Infill | Fill density | 20% |
| Skirt and brim | Brim width | 5 |
| Brim seperation gap | 0.13 | |
| Support material | Generate support material | true |
| Auto generated supports | true | |
For the Wipetower Basket, this was a quick sketch with a small volume for single color prints. For big multicolor prints, you will need a slide into a big cardboard box off the table or like so.
Happy Printing 😄
Tags
Model origin
The author marked this model as their own original creation.