Roof with mounting for VyplašTo

I needed a cover for my VyplašTo and also be able to remove it for winter - why to have it there. So I created this roof with mounting options for three screws. There is also a one small hole - just to be able to mark position, where you can lead the cable for 12V through wall if you need so. To stick the VyplašTo device to this I would suggest double-sided tape.

Hole for screws have diameter 8.2mm.

Printed from PLA for measure test, I would suggest PETG or ABS from which I will print it later also. 

0.4mm nozzle, 0.2mm layer height.