Voron 2.4 Horizontal Z Axis Cable Chain Mod

Update: (09/09/24)

•    Addition of the 2 Hole remix by Njiall_154689 ( https://www.printables.com/model/993280-voron-24-horizontal-z-axis-cable-chain-mod ) 
• With the new addition, kindly contributed by @Njiall_154689 of the 2 Hole Igus Chain Remix I have combined both CAD files into a single .step file for simplicity 

---------------------------------------------------------------------------------------------------------------

Hardware: 

(Generic 3 Hole)

• 6x M3 heat sets
• 3x M3x8mm FHCS
• 3x M3x12 FHCS
• 3x M5x10mm BHCS
• 3x M5 T Nuts
• Generic 10x15 Cable Chain
• 3mm x 1mm Zip ties

(Igus 2 Hole)

• 4x M3 heatinserts
• 2x M3x8mm FHCS
• 2x M3x12 FHCS
• 3x M5x10mm BHCS
• 3x M5 T Nuts
• IGUS 10x15 Cable Chain
• 3mm x 1mm Zip ties 

Assembly:

1. Install heat sets into both printed parts
2. Mount the “Upper Mount” to the top of the rear Gantry extrusion with 2x M5 BHSC and T Nuts
3. Mount “Lower Mount” the lower rear frame extrusion with 1x M5 BHCS and T Nut
4. Secure Cable chain to upper mount with M3 x 12mm FHCS and lower mount with M3 x 8mm FHCS
5. Secure wiring loom to “Lower Mount" with 2x zip ties

Notes:

     - included .STEP for modifications and Remix's