Riden RK6006 minimal case

Printing Instructions:

• Layer Height: 0.2 mm for standard printing.
• Line Width: 0.4 mm.
• For Best Appearance: Use a layer height of 0.16 mm.
• * Grill.stl: should be printed without top and bottom layers, with 30% honeycomb infill pattern.
• Material: Use any high-temperature filament; do not print using PLA filament.

Place the grid into the cutout in the top and bottom lids, add glue to fix it. Also for assembly you will need 4 pcs of M2.5*8 screws.