Wolverine & Deadpool logo / disk

Wolverine & Deadpool disk. Looking forward to seeing the new movie so I put this together based off of a graphic found online. Talented designers already uploaded the half heart pendent so I put together this circular one.

Eye on Deadpool side was glued into place. You can glue the 2 halfs together, drill a hole in one side and boom, you have a keychain.

Notes:

I have it set up as different pieces for multi color printing or easy painting. Also uploaded combined files.

DP.stl = Deadpool side * started black, stopped print and changed to red when lip started printing.

Wolv.stl = Wolverine side started yellow stopped print and changed to black when mask started printing.

Eyes-white.stl = separated out eyes. *they fit snug when I printed them, may require some sanding for fitment.

W&D-combined-w-eyes.stl = everything combined into one object.

W&D-combined-no-eyes.stl = eyes removed if you want to print them separate in white.

Scaling down would probably make the eye tolerances really tight. Mine fit snug at default size.

At 100% its about 75mm wide x 75mm tall and 6mm thick.

Print Settings

• Printer brand: Longer
• Printer: Longer LK5 Pro
• Rafts: No
• Supports: No
• Resolution: .2
• Infill: 20%
• Filament brand: Esun / Elegoo
• Filament color: black, red, white, yellow/gold
• Filament material: PLA

Design inspired by screenpai3d fan art found here