Martor Scalpel Case

A case for a Martor scalpel. Has 2 versions avalible.

V1 has a hinge and uses 2x M2x20 screws.

V2 & 2.1 has the exact geometry of the origional case the scalpel came with, and the lid comes right off.

Don't worry, the Martor logo is not forced on you through the .STL file.

I have added a .SVG file with its shape. Just place it in the center as modifier, Cut 0.3mm deep.

The magnets are 5mm wide and 2mm tall, you'll need 4 of them.