PipBoy 3000

Disclaimer: this model is not mine*, I downloaded it from this page where you can follow further instructions in order to paint it and customize it to be closer to the original model - https://ytec3d.com/pip-boy/

Other than that, this model has been scaled to fit a samsung galaxy S22.
 

Parameters:

• infill: 35%, cubic/gyroid;
• layer height: 0.2mm; 0.15mm for the wheel only;
• supports: snug; 30° threshold angle;
• brim: i used 20mm for the bigger parts, faceplate excluded.;
   

*all credits go to dragonator

The model's proportions have been scaled to fit a samsung Galaxy S22.