AnkerMake M5C GoPro Build Plate Camera Mount

This mounts under the build plate and contains a mount for a GoPro camera. I just have a cheap GoPro knock-off but I don't see why it wouldn't work with a brand name one. If using a heavier camera, it might be a good idea to increase the infill. I used 10%, but my camera is very light as well. 

I originally printed this in PLA but it started to warp as soon as the heat plate got hot enough, so stick with PETG. I've also heard that PETG will start to warp after a few prints but I have not confirmed this myself.

I found that it was difficult to install if I just unscrewed the front two screws, so I removed one on the back and loosened the last one. This allowed me to swing the heat plate back and then I could pop the mount over the exposed screw holes.

This is the first complex model I've ever done. Any feedback is welcome!

Replaced the Wyze V3 mount with a GoPro mount