ExpandaShelf Horizontally Expanding/Expandable Display shelf (Read Description)

If i can print it successfully on the Anet A8, then you can!

Print Settings

• 0.2 mm Layer Height
• Shelf Body: 10% cubic infill
• Shelf Bracket and connectors: 100% infill and concentric pattern for infill & top and bottom layers to save time
• Outside walls first for best dimensional accuracy

Notes

1. Bracket is designed to be compatible with ¼ inch screws
2. Each shelf should have one bracket at the edge of each side to hold them completely flat
3. When adding on another shelf, make sure to print and screw in another bracket if needed where the shelves connect so it is more stable.