Crank cover for Cannondale Hollowgram MTB cranks
A crank cover to replace the expensive and fragile boots made by Cannondale (P/N CP2401U10OS).
3
26
0
117
updated July 25, 2024
Description
PDFDrill a 3mm hole in the bottom if you are concerned about water being trapped when the crank is stored in the down position.
Printed in PETG with variable layer height (0.2mm max, ~0.11mm near the top). No supports or brim needed.
To install: Remove pedals, slip over crank, then reinstall pedals.
Tags
Model origin
The author marked this model as their own original creation.
