Frog Fishing Lure

Hardbody Topwater Frog Lure

Has a treaded bottom to hopefully stir up turbulence in the water

Printing

Print with at least 0.2mm resolution with 2 walls, 10% infill and the top 15-20 layers being solid. Print with the flat top on the bed and use supports. 

Building

Make eyelets with 0.3"-0.5" long twisted stems with stainless wire, heat up the stems and push/melt them into the pilot holes in the lures. Paint as you wish. Dip in epoxy or polyurethane and attach hooks. Enjoy the topwater bite.