Magnetic Tent Anchor

Made to enable me to hang things in a tent when you don't have any anchor spots available. Will hold around 5 lbs or more depending on the magnet strength. I started with 20x2mm magnets, but they weren't strong enough so I glued 3 together which seems to work fairly well. 

Magnets I used: https://a.co/d/2aDgDbx

Make sure you put the magnets in the same way if you are doing multiple sets. That way it's all interchangable.

Print Settings

• Print with supports
• 0.2 layer height
• PLA
• 80% infil