Trinket Trader Badge

Updated 4/4/24: V2 files have been added. These have been remade from scratch and now fit together better. Supports are needed for the top ring. I also print the top with a concentric pattern for the top/bottom instead of lines. There are 2 different center pieces. One is plain while the other has a wood grain texture on top.

3 part trinket trader badge I made for Renaissance Festivals.

I printed the 2 rings in grey filament and the badge with a wood grain filament. The Badge fits snugly inside the bottom ring, and the top ring glues to the top edge of the bottom ring.

Print Settings

Printer Brand:

Robo 3D

Printer:

R1 PLA Model

Doesn't Matter

Supports:

Yes

20%

Notes:

Concentric Top/Bottom Pattern is suggested for the top ring to improve quality.
Supports needed for the lip on the underside of the top ring.

I printed the bottom and center pieces with 0.2mm layer height w/ adaptive layers and 0.12 layer height for the top ring.

I will revise the files to move the lip to the bottom ring and/or remove the round bits from the top if there is interest.