Cup Holder Adapter

I made this model to fit on my mower so I can carry sports bottles and big thermos cups, like the Stanley ones, when I'm out mowing the lawn. It also works with most regular car cupholders, so you can use it in different places.

I printed the standard model using Overture PLA filament, and it turned out very strong.

Updates:

• August 5, 2024 - I made a V2 with thicker walls similar to the original thicker model, but I adjusted the cup size to accommodate different cups with larger bases. I also increased the size of the part that goes into the cup holder to provide extra room so that you don't have to force it in. I recommend using this version as it is stronger and fits better. I would not recommend using the original Standard model at all because it broke a few days after I made it when I had to go up a hill sideways and lean on it. The thicker model is still strong enough, but I didn't like the fit.

• July 24, 2024 - I made another version with thicker walls, specifically to handle weaker PLA, and the design is a bit different.

 My Print Settings:

• Layer Height: 0.20mm
• Wall line count: 4
• Top & Bottom Layers: 4
• Infill: 15% (Gyroid)
• Support: None (You can add a brim if you have adhesion issues)

Support My Work:

• Should you want to, I have a PayPal you can donate to, these models take a lot of time and energy to make, Buy me a coffee I need the caffeine. 😆 ☕