Bambu lab AMS hub bracket

You might need this if you are like me

• Put the enclosed printer inside an enclosure
• Sit the AMS on the left side

This is my setup

Next thing is to have a 6pin extension cable (Microfit 2x3 3.0p) to with panel mount connector at the outside of the enclosure. I'm still waiting for the connectors to arrive.

You'll need 

• 2x brass M3 threaded inserts.
• 2x M3x25mm screws

If you need PTFE splitter, here it is https://www.printables.com/model/951854-ptfe-splitter-for-bambu-lab-x1c-p1s-with-ams

As always, fusion f3d file is included for you to play at home