Shipping Container Terrain Print-In-Place Working Doors

Shipping container terrain written in cadquery.
The container is printed in one piece with two working hinges and doors.

I made two different variants one with greebles and the other plain.

---

For more details and part specs go here:
https://miniforall.com/shippingcontainer

This is an open source project that you can customize:
https://github.com/medicationforall/cqportal

You can support this project and other projects I'm working on at patreon:
https://www.patreon.com/medicationforall

---

### Greebled Container

* Length - 150mm
* Width - 75mm
* Height - 75mm
* Weight - 117grams
* Print Time - 16 hours 50 minutes
* Layer Height - 0.2mm
* Infill - 10%
* No Supports
* to fit the model on 200x200mm print bed, I printed the model with the doors up.
* I print with a brim of about 3 lines because the closed door contact is very small on the base
 

### Plain Container

* Length - 150mm
* Width - 75mm
* Height - 75mm
* Weight - 115grams
* Print Time - 15 hours 18 minutes
* Layer Height - 0.2mm
* Infill - 10%
* No Supports
* To fit the model on 200x200mm print bed, I printed the model with the doors up.
* I print with a brim of about 3 lines because the closed door contact is very small on the base