Alley 02 (Hueforge Filament Painting)

Hueforge filament painting (6 colors) of an alley, real and unreal, bright and dark at the same time.

The photo shows an actual print of the model (scaled down to 130x130mm).

I like the more cartoon-ish look when printed with matte filaments (see my make of this filament painting) - you will get smoother, more photo-like transitions with non-matte filaments. Please choose your filaments accordingly.

For this print I used the following filaments:

• eSun PLA matte - Deep Black
• Bambulab PLA matte - Dark Blue
• Extrudr PLA NX2 - Brown
• Extrudr PLA NX2 - Orange
• Eryone matte PLA - Yellow
• eSun PLA matte - Milky White

Other filaments that I have tried also worked well... experiment with what you have!

The following PLA filaments also work well:

• Bambu Lab Matte PLA - Charcoal
• Eryone matte PLA - Navy Blue
• Bambu Lab matte PLA - Dark Brown
• Bambu Lab matte PLA - Mandarin Orange
• Bambu Lab matte PLA - Lemon Yellow
• Bambu Lab matte PLA - Ivory White

How to print:

• Start with Black
• At layer #6 (0.56mm) swap to Blue
• At layer #7 (0.64mm) swap to Brown
• At layer #10 (0.88mm) swap to Orange
• At layer #16 (1.36mm) swap to Yellow
• At layer #18 (1.52mm) swap to White for the rest.

The original STL is 200 x 200 mm. If you want to scale it down, please scale only X and Y - do not scale z (height). I added a 130mmx130mm pre-scaled version to the download section.

Print with a layer height of 0.08mm and a first layer of 0.16mm. 100% infill (aligned rectilinear), 0.4mm nozzle. I recommend the slicer/speed settings from this Youtube video by the maker of Hueforge:

https://youtu.be/CGS7Adhyz2w?t=348

As usual, first slicing can take quite a while (> 2M triangles). 

If you see a warning in your slicer that floating areas were found, you can safely ignore it. No supports are required to print this image.