Hula Sovol SV08 XtraH

Hula Sovol SV08 Feed Adapter with extra height for Hula

Credits to the original project of ThrutheFrame who made the Hula Project. This models fits to the

Hula for Voron. Please read that manual for more informations.

Slicer Settings

• Wall loops/perimeter = 4

• Top layers = 4

• Bottom layers = 2

• Infill = 3D Honeycomb @ 15%

• Support not needed

Needed parts from the Hula for Voron Project by ThrutheFrame:

Build Plate 01 - TPU Air Pad

Build Plate 02 - TPU Dampener

Build Plate 06 - Insoles

Hula for Voron can be found at https://makerworld.com/en/models/417509#profileId-319901

Adds some mm ventilation room below the printer