Gridfinity UltiMaker Print Cores

Securely holds 3 UltiMaker print cores with the same snap-in geometry as the UltiMaker 3's print head. Designed for integration with Zack Freedman's Gridfinity organization system; uses a 2x2 space.

My model was printed on a Prusa i3 MK3S (0.6mm nozzle) in Prusament Galaxy Black PETG on the “0.35mm SPEED” profile with “Solid infill threshold area” set to 100 mm^2 in PrusaSlicer. No supports are needed. Pictured with a 3DSolex Printcore BB.

Gridfinity is published under the MIT license