Kegerator Collar Corner Bracket

Corner bracket to simplify building the collar for a keezer/kegerator with 2X6 lumber. Designed to allow a little bit of slop in the lumber/saw cuts. 

This is intended to be a structural part, I recommend the following settings:

• PETG, PLA, or ABS/ASA
• .3mm layers or larger if you have a larger nozzle
• 3 perimeters
• 20% infill

The holes are sized for ¼" fasteners, lag bolts for the lumber and self-tapping screws for the connection to the chest freezer.

Maybe a solution looking for a problem, but hey, it's fun to print things.