Arrma Infraction - SkyRC GSM020 GPS Rear Mount
This mount for the Armma Infraction puts the SkyRC GSM020 GPS on the outside of your truck where you can see it. It…
9
82
1
614
updated
December 17, 2021
Description
PDFThis mount for the Armma Infraction puts the SkyRC GSM020 GPS on the outside of your truck where you can see it. It will sit horizontal with no angle and is held down by 3 zip ties per side and one on cross brace so it won't slide down.
You'll need:
7 x 2.5mm x 200mm zip ties (or longer)
2 x M3x10mm cap head bolts (12mm or 8mm also work)
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
No
Supports:
Yes
0.2 / 0.3
Infill:
20%
Filament:
Sakata 3D PLA+ Silver
Notes:
You will need supports for the base; it should all come off pretty well though. PLA works, though PETG, Nylon would also work as they're a little tougher.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.