Large kitchen sponge holder

I have a large kitchen sink, and most of the other sponge holder designs don't fit it. I made this one to clip on to the faucet and hold about 4 sponges and one bottle scrubber, and keep them dry so they don't get gross.

I measured my own faucet and sink, so the clip will likely need to be modified in order to fit someone else's. 

Printing instructions: For the main body, I printed it with 0 top and bottom layers and honeycomb infill. This gives the walls a sort of cardboard look, but it was easier than adding the pattern into the model itself. I used 15% infill but 10% would probably also work.

I also printed it in PETG because it's waterproof and heat resistant, but you could probably use PLA without issue.

PSA: Don't use the green side of the sponge on Teflon nonstick pans, and especially never put anything metal or glass in them!