Plateholder and PTFE Clip Combo

A simple plateholder with integrated PTFE clip, so the Buffer can reside on the IKEA Lack V2 enclosure.
As well as a modded Bufferholder to glue / screw on there, to replace the large one from the stock model.

Everything was “quickly” cut, copied arragend and merged in Prusa Slicer.

Replace parts, as per the instructions of the Buffer assembly.

Simply use doublesided tape to stick the modded bufferholder to the enclosure top.
If you prefer screws, you need to drill pilot holes into the part, or add some negative volume cylinders during slicing.

• Modded Plateholder/PTFE-Clip Combo
• Modded Buffferholder

To better comply with the IKEA LACK V2 enclosure
Prusa Enclosure V2 - MMU2S by Ondřej Stříteský