Levelling Knob for K1 Max

This knob is designed to adjustments easier when do the screw tilt calculate. Each indent represents 5 minutes, and you can feel the prominent indicator for a full turn.

BOM

• 4 pcs of Silicone spacer for bed leveling (18mm diameter / 4mm bore / 16mm height)
• 4 pcs of FHCS M4x40mm
• 4 pcs of M4 nut
• 4 pcs of M4 lock nut (salvaged)

Instruction

• Print the spacer piece with ABS; otherwise, it will melt.
• No support needed.
• Read about screws tilt adjust functionality and how to install here.