Can Bug Cover Holder

This is a holder I designed to hold 6 of the regular can lid bug covers found here:

https://www.printables.com/model/928800-beer-can-lidsoda-can-lidbug-cover-no-supports-need

No supports needed to build and can print with little infill as this doesn't have much need for strength (unless you've got some rough campers!  The sides can be a bit flimsy with just PLA but even if they pop loose from the bottom, they still hold the lids in place and it's a little easier to use.

My rudimentary setup (with my default settings):

AnyCubic Kobra 2 Pro

AnycubicSlicer 1.4.4

0.40 mm Nozzle

SUNLU Yellow PLA+ (my GF likes yellow) (Uses 42.26g)

Nozzle: First Layer: 225c  Other Layers: 220c

Bed: First Layer: 65c  Other Layers: 60c

(These temps work best for me in my environment.)

5% Gyroid Infill

No Supports (Ignored warning)

First Layer Height: 0.2

Layer Height: 0.16

Perimeters: 4

Top/Bottom Shell: 4

Standard Speed (1h 13m)