Zulu hydrapak cap

Cap for the mouthpiece of Zulu hydrapak or other hydrapaks with mouthpiece diameter of ca 19mm. It's a snug fit.

Print in TPU (mine was 93A):

• 1x body
• 1x sleeve
• 2x ring

Assembly:

1. Unscrew the hose from the hydrapak
2. Force one ring over the hydrapak end of the hose, then the loop of the body and lastly the second ring
3. Get the first ring close to the mouthpiece
4. Fit the sleeve over the hose close to the mouthpiece
5. Secure the sleeve with the first ring
6. Get the loop of the body over the sleeve
7. Secure the sleeve with the second ring