Google Pixel 8a

The case includes cutouts for the side buttons, SIM card, microphone, speakers, and USB-C connector. There are circular openings with channels on the back for better heat dissipation.

IMPORTANT NOTES:

1. The bottom side of the model contained deformations after exporting to STL, which were successfully removed by increasing the thickness by 1mm. Therefore, after placing the model on the build plate, I recommend shifting the model 1mm downwards, which will trim it to the original value.
2. It is not very easy to remove the phone from the case once inserted, but it is possible - you need to open the case on multiple sides. So, be careful.