GameBoy Pocket HSW Mount

GameBoy Pocket Holder for Honeycomb Storage Wall

Enhance your retro gaming setup with this modified GameBoy Pocket holder, specifically adjusted to fit seamlessly into the Honeycomb Storage Wall system. This model offers a sleek and secure way to display and store your GameBoy Pocket, perfectly integrating with the hexagonal pattern of the Honeycomb Storage Wall.

Printing Recommendations:

• Material: PETG recommended for durability and ease of printing (PLA should also work).
• Layer Height: 0.2 mm for a good balance of detail and print time. I used the .2 speed profile for the MK4 in Prusa Slicer.
• Infill: 100%.
• Supports: Minimal supports needed; primarily around two of the HSW inserts.

Usage: Perfect for retro gaming enthusiasts looking to showcase their GameBoy Pocket in a unique and stylish way. Whether you’re organizing your gaming room or creating a display wall, this holder is a functional and visually appealing addition to your Honeycomb Storage Wall setup.

Tip: Use the same settings (nozzle size, layer height, filament) as for the HSW to ensure a good fit.

Replaced the IKEA inserts for the HSW.