Adjusted Prusa XL nozzle brush debris bucket
Adjusts original to accommodate my wider nozzle brush design, and shaves a tiny bit off the depth of the bucket.
3
35
3
332
updated July 19, 2024
Description
PDFPrint with supports. I used PETG.
Just hang this like the original. Make sure the notch (which is not centered) aligns with the nozzle brush.
OpenSCAD file provided for further tweaking. This needs the original .stl file downloaded and renamed debris_bucket_orig.stl
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
- Creates a wider opening at the back to accommodate the additional width of my remixed nozzle brush.
- Moves the notch in the front somewhat to the right to accommodate the asymmetry of my nozzle brush remix.
- Shaves 1mm off the depth of the bucket. I noticed that frequently, for toolheads #2 and #4, the alignment post of the bed sheet would catch on the edge of the bucket when the bed would rise.
