DIANA Airgun Rail Adapter

These pieces are used to mount something onto a DIANA airgun. I have multiple DIANA airguns and this design works for all the models I have.
You will need M3 screws in different sizes (usually M3x16 or M3x20) to finish the build.
To mount something onto the airgun, 4 M3 screws can be used which are spaced 32mm in the horizontal direction and 12.6mm in the vertical direction.
In previous versions, the adapter would loosen up after a couple dozen shots, so i designed the "Klemmen" to prevent the adapter to slip away

If you need something changed/adapted, feel free to contact me