Union Jack Flag Themed Tissue Box cover

A patriotic tissue box holder! Designed to fit over a typical UK extra-large or "man size" tissue box measuring 315mm x 65mm x 55mm. As this was too large for the print bed, I split both the top and base into two parts. Simply assemble using Super Glue. The top joint is conveniently hidden by a section of the the flag motif.

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK4

**Rafts:**

No

Supports: 

Yes

**Resolution:**

0.3mm

Infill: 

15%

**Filament:** Generic PLA Red, Blue 
 

Notes: 

The top right piece only requires supports to be enabled due to the overhang of the connecting part.
Both base parts will fit on the heat bed at the same time if oriented correctly.

*Enable brim when printing the base parts to avoid any lifting at the ends.

Post-Printing =============

Dry fit and prepare all joints. Lightly sand all points of contact and assemble the base and top parts separately using Super Glue - hold the joints firmly in place while the glue sets. Attach the top once the glue has dried sufficiently (approximately 1 hour).

How I Designed This

Autodesk Fusion. Downloaded a generic flag image and parsed it through a free SVG converter. Inserted and re-sized the SVG file in Fusion to fit the top.

Category: Organization