The BBM "Interfacer"

Again, I was inspired by ProkhorVLG and their Sunset Research Initiative worldbuilding project/art. This time, I decided to make the BBM "Interfacer" model robot.
This fellow was originally designed for office work, but I've included a few extras if you want to lightly customize yours.

There are three "styles" of certain parts: Plain, Business, and Sheriff. You can mix and match these, and I've included images to show the parts unique to each set. One piece you can't see from the images is the Sheriff's Spurs on the lower legs.

Assembly should be straight forward and I've toleranced everything out fairly generously so even if your printer isn't 100% calibrated, it should be fine. All you'll need is a little glue to hold everything together.

-------------------------------------------------------

I suggest using your best judgement on tree vs standard supports for each piece, based on your experience with your own printer. I've oriented everything for ready-printing so no adjustment should be needed.

At 100% size, the fully assembled Interfacer will stand about 12 inches tall.