OmniStand Top Mount Filament Guide

This is a filament guide designed to fit over the OmniStand Top Mount Spool Stand created by @BaronWilliams.

The original spool stand is here:
http://www.thingiverse.com/thing:704631

I would suggest rotating the STL Y-axis 180 degrees and printing it so that the majority of the guide is on the print bed (see image). If done correctly, the only part off the print-bed and maybe requiring supports is the small, rectangular box which fits over the spool stand.

Print Settings

Printer Brand:

FlashForge

Printer:

FlashForge Creator Pro

No

Supports:

Yes

0.2

Infill:

20%

Notes:

You can print at whatever infill you wish, but I chose 20% as it does need some "solidity" in order to withstand the tugging from the extruder head as it tries to pull more filament off the spool.

I do suggest using supports under the angled rectangular mount box (after flipping the STL Y-axis 180 deg).

How I Designed This

I used OnShape to design this armature.