HOBO U23-001 Pro v2 Solar Radiation Shield

Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger and other small devices.
1
15
0
89
updated July 18, 2024

Description

PDF

Overall

Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger. You can install any small devices in it. e.g., SwitchBot Indoor/Outdoor Thermo-Hygrometer (https://www.switch-bot.com/products/switchbot-indoor-outdoor-thermo-hygrometer). I confirmed that this works as well as Onset's very expensive solar radiation shield (RS1). 

The Onshape Document is available below. 
 https://cad.onshape.com/documents/b682a7956f903e31f9ca8ee6/w/25176f20d8459132a2a7558b/e/eb60c6558451cfcf0839d66a?renderMode=0&uiState=6698d31810e7e04019648b2b

How to make

  • Print 2-3 for middle_plate and 1 for others
  • I used white PolyLite ASA filament. I recommend using white ASA for outdoor durability.
  • Stack them and fasten with 3 sets of m4 x 100mm screws and wing nuts.

Tips for printing

  • Enable brim for avoiding warping
  • 15% infill gives enough strength when printing with ASA
  • Enable organic support for supporting the overhang at the insulok hole of base_plate.

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more