Upgrade & lighting enclosure FLASHFORGE ADVENTURER 5M

A button with a lock was inserted into the camera casing, taken from the site, to turn on the backlight from the front panel. A channel for wiring is made along the inner wall. (panels B and C)

In panel D, the outer corner is cut off to reduce the bending of the bar feed tube when the coil is suspended at the top.In panel D, the outer corner is cut off to reduce the bending of the bar feed tube when the coil is suspended at the top.

In the remix of the coil suspension rod, the filament termination sensor is slightly rotated towards the input hole for the panel D bar for its easier entry.

Модификация для включения освещения с панели. Доработка для изгиба штанги.