Fence Post Topper/Cap

 This is a 4x4 fence post topper/cap that snuggly fits on to your 3.5 inch/89mm fence post.  I printed this model in PETG, but any ultraviolet and heat resistant plastic will do.  It externally measures at 127mm x 127mm x 70mm(5in x 5in x 2.75in) while it's internal fitment is 89mmx89mm(3.5in x 3.5in).  I was tasked at making a fence post topper/cap that wouldn't degrade as much over time compared to a wood one.  It should be paintable with wood paint after a quick priming.  This model is easy to scale to other fence post sizes if you need it.  Please post pictures of the printed model installed on your fences!  It would mean a lot.  Cheers! :)