Ikea Ivar compatible Trash bin for Dolce Gusto coffee capsules

Hi there.

This is a solution for a very particular problem. I needed a trash container for Dolce Gusto coffee capsules that did not drip or leak. i did like the double cup design @LopCop_179182 did on his trash container, so i decided to use and improve on it and basically did a redesign to improve on print time and functionality.

This is made to fit the Ikea Ivar system, and it hooks on the main side units.

Mine was print on generic cheap black PLA from Leroy Merlin and even the cups printed on vase mode did not deform if you put a freshly used and pretty hot capsule on it.

No supports needed, no brims, nothing. Just print the base with your regular configuration and 15% infill.

For the cups i printed mine with 0.24mm layer height and 0.7mm wall width (i am a newbie at this and wanted to test a way to make vases a little sturdier - if this numbers looks wrong to you please forgive me and ignore them at all.

The unit from the pictures is a prototype with a detachable hook to the Ivar cabinet sides, wich after printing it i realised was unnecessary. The uploaded version (v1.0) just have a simpler hook fixed to the cups base.

Hope someone enjoys this.

Thanks!

This is made to fit on the side units of the Ikea Ivar cabinet system.