Bleach - Byakuya Kuchiki - HueForge

Here is the PrusaSlicer version I used on my Prusa MK4 with MMU3.

Thanks to the author: https://wall.alphacoders.com/big.php?i=440427

Manual print instructions

Print at:

• 100% infill
• Layer height: 0.08mm
• First layer height: 0.16mm
• Ironing: 15%

Filaments Used:

• Polymaker PolyTerra PLA+ Black
• Polymaker PLA PolyLite Pro Purple
• Polymaker PolyLite Silk PLA Magenta
• Polymaker PolyTerra PLA Fossil Grey
• Polymaker PolyTerra PLA Cotton White

Swap Instructions:

1. Start with Black
2. At layer #5 (0.48mm) swap to Purple
3. At layer #7 (0.64mm) swap to Magenta
4. At layer #15 (1.28mm) swap to Gray
5. At layer #17 (1.44mm) swap to White for the rest