Garden water hose splitter for drip hose

If you want to feed 2 drip hoses from one tube you normaly need a Splitter and 4 hose connectors and a bit of extra tube. This type of connector just need 2 connectors to connect 2 drip hoses to one water hose.

Additional parts you need

• 2 standard gardena style hose connectors
• rubber ring from a male hose connector

Print instructions

Main Part:

• use PETG or ASA (I used prusa PETG orange)
• Set seam position to random, to avoid leaks through
• Use lots of infill and at least 3 perimeters to make it water tight

Washer:

• you need 2 of them
• use TPU (I used sainsmart TPU with shore 98A)

Assembly

• put washers over the threads of the 2 sockets
• and screw them into the main part thightly, but not so tighly that the washer is squished out
• put the rubber ring onto the male connector
• connect your hoses

Note for the washers:

You can try to use sealing washer from hardware store. Those I got didn't work, thats why I printed my own. I learned that ring washers won't work, because they squish out when you thighten the connector. 

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.