D-Tecc CardCase

A small Case for Creditcard-Sized cards and IDs. Fits perfectly into pockets.

updated November 22, 2024

Description

Printing:

Top and Bottom out of PLA (10-20% infill)

Carbine out of PLA or a stronger material

Strap out of TPU

Assembly:

You need:

4x 3mm nuts

4x 3x8mm screws

Pressfit the 3mm nuts into the Top and screw Top and Bottom together.

I hope it works for you as good as mine is working.

There are other prints on my account if you're interested in trying different things.

The author marked this model as their own original creation.