Using a hot melt nut is more convenient to install and remove
Without frequent disassembly, you can use the M4 machine meter screw to install it directly, but the hole may be smaller
SR188(dxDxB)：6.35×12.7×4.763mm bearings use a hybrid type to rotate more durably
I use support printing when printing, the surface effect is better, and the material uses PTEG or PLA
Have fun !!!
| BOM | |
| Bearing | SR188x1 (dxDxB)：6.35×12.7×4.763mm |
| F.H.C.S | M2x8 |
| Machine meter screws | M2.5x8 |
| Hot melt nuts | M2.5x4x3.5 |
| Ball | D8 |
The author marked this model as their own original creation.
