the cube · drawer module

the cube

drawer module

modern minimalist drawer module design inspired by the cube movie

full dimensions in mm ~ x:200 · y:200 · z:200

• 0.28mm layer height
• 10% cubic infill

this design takes about 1.5kg of filament and quite a few hours of printing, it's designed to be robust and have a “heavy” presence, therefore I did not approach it with a filament saving mindset (thinner walls, grids, etc)

also the tolerances are relatively tight, therefore cannot guarantee that if you scale it down that the drawers will slide in properly, so I don't recommend scaling it down. Another important consideration is to make sure that you have proper bed adhesion as to not have any lift, therefore i recommend using 3DLAC to ensure everything stays nice and flat

notes

• includes bambu studio 3mf file and STLs
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• commercial licence membership available on my patreon