IKEA LACK Enclosure Filament Feedtrough
This models helps to feed filament through the upper table of LACK enclosure
3
27
0
118
updated July 17, 2024
Description
PDFMy LACK enclosures filament rack is on top of the tables. To feed the filament to my printer I drilled a hole through the tabletop.
Because the tabletop is hollow inside a little pipe was neccessary to lead the filament through the tabletop. I came up with this model consisting of the pipe part named feedthrough. It is inserted into a drilling of at least 6 mm diameter. To tighten the feedthrough the feedthrough_nut is required.
Print settings
No special settings required
Tags
Model origin
The author marked this model as their own original creation.
