CoolerMaster NR200 top-mounted radiator bracket

Summary of the T240R- Top 240 mm Radiator mount for the Coolermaster NR200 ITX case.

This is a mounting assembly/system mod for the Coolermaster NR200 to mount a full size 240mm radiator with 2 120mm fans to the top of the NR200. This mod uses the existing top bezel to cover the top for a fully enclosed look. This assembly is non-destructive -- no permanent changes to the original case are made; this means, NO DRILLING MILLING OR CUTTING REQUIRED. The assembly is space optimized to minimize additional case height added due to this mod, leaving around 1-2cm clearance from the top of my RAM and PSU extension cable. This mod also includes two brackets to move the front IO (power button, usb3.0, and audio) up to the new height.

Materials needed:

• M3 6mm long socket head QUANTITY - 8
• M3 8-10mm long socket head QUANTITY - 8
• 6mm long radiator mounting screws (for mine i used #6-32 thread screws) QUANTITY - 8
• 35mm long radiator mounting screws (for mine i used #6-32 thread screws) QUANTITY - 8
• A 3D printer (I used a Creality CR10mini) and filament
• Hex and Phillips screwdrivers

print instructions

PRINT 1 OF EVERYTHING, but PRINT TWO OF (2X):
T240R2_sideCover_V3_print two-mirror one.STL (AND MIRROR ONE OF THEM)
T240R_caseToBracketMount_v3.STL
T240R_caseToBracketMount_v3mirrored.STL

Please be noted:
This file is distributed under the CreativeCommons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material

Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original