Unifi USW 16 Lite POE Switch - 1U Rack Mount

From the original upload:

I designed this 1U rack mount for the Unifi USW 16 Lite POE switch which fits the standard 19" racks with a depth of under 8 inches. The screw holes on the back are for M4.5x.75 as those were the spare screws I had lying around. The two pieces for the rack mount are meant to be joined without any hardware, but if they are loose, you can use a dab of hot glue.

This is my first ever from scratch design.

Printed with my E3Pro and PLA silver filament. Should print in about a day for all parts combined depending on your printer.

Non-commercial use only please!

EDIT: added the .step file for ease of modifications

Notes:

Supports are only needed for the extension piece and only on build plate.
You can go with a lower infill extension and back plate. You can even try the main part with a lower infill if this rests on another item below it.