Use your Phantom 4 or 4 pro to cast your Fishing Bait out in the surf or wherever you Fish.
Zip tie this print to the bottom leg of the Phantom 4 in the center.
Attach your fishing line to the card.
insert the card and the weight holds it in place.
fly drone out steady and slowly till you rech desired point. lock the fishing reel and the card will pull out droping the bait. make sure slot is facing towards the rear of the phantom.
made with safety in mind. incase while going out the reel locks or jams up or a bird hits the line the card will pull out releasing the drone so it may fly safely back and not crash in the water.
Phantom 4 can carry a max of 1.7lbs of weight.
Print PLA or ABS no supports especialy in the slot area. your printer should bridge it nicely.
layer height 0.16 - 0.20
here is a video in action
The author marked this model as their own original creation.